+
  • Wire Cable Heat Shrink Marker Sleeve.jpg
  • Heat Shrink Marker Sleeve for Wire Cable.jpg
  • Wire Cable Heat Shrink Marker Sleeves.jpg
  • Wire Cable Heat Shrink Marker Sleeving packing.jpg

DYF- Low smoke flame retardant heat shrink Marker sleeving


Product Overview:

Heat shrink marker sleeving kit, Roll packing identifies sleeving, DYF- Low smoke flame retardant heat shrink Marker sleeving, heat shrink identification sleeving, heat shrink marker sleeving,
Contact us
  • Product Features
  • Specifications
  • Technical data
  • Video
  • Product introduction:
    DYF- Low smoke flame retardant heat shrink Marker sleeving made by radiation cross-linked polyolefin materials, with excellent physical and chemical and electrical properties,Roll packing flame retardant heat shrink identification sleeving can be used in a special environment and long-term use, is widely used for signal and power cable interface identifier, as well as for rail transport and telecommunications, precision instruments, automobiles, ships, spacecraft, aircraft and nuclear power off the island and other areas.
     

  •  DYF-2X ( Heat shrink Rate: 2: 1 )

    Product Model As supplied(mm) Completely after recovery(mm)
    Inside diameter Width of the compressed Double wall thickness Reduced diameter Single-layer thickness
    DYF-2X-1.6 2.00±0.20 3.7±0.3 0.48±0.10 ≤0.79 0.45±0.06
    DYF-2X-2.4 2.79±0.20 5.0±0.3 0.48±0.10 ≤1.18 0.49±0.06
    DYF-2X-3.2 3.64±0.23 6.3±0.4 0.48±0.10 ≤1.59 0.51±0.06
    DYF-2X-4.8 5.26±0.25 8.9±0.4 0.49±0.10 ≤2.36 0.54±0.06
    DYF-2X-6.4 6.92±0.28 11.5±0.4 0.50±0.10 ≤3.18 0.56±0.06
    DYF-2X-9.5 10.2±0.32 16.7±0.5 0.51±0.11 ≤4.75 0.59±0.06
    DYF-2X-12.7 13.5±0.36 21.8±0.6 0.52±0.11 ≤6.35 0.60±0.07
    DYF-2X-19 20.1±0.40 32.2±0.6 0.53±0.11 ≤9.53 0.62±0.07
    DYF-2X-25 26.7±0.45 42.5±0.7 0.55±0.12 ≤12.7 0.63±0.07
    DYF-2X-38 39.8±0.51 63.2±0.8 0.57±0.12 ≤19.1 0.64±0.07
    DYF-2X-51 53.0±0.56 83.9±0.9 0.58±0.13 ≤25.4 0.64±0.08
    DYF-2X-76 79.4±0.56 125.3±1.0 0.59±0.13 ≤38.1 0.64±0.09

    DYF-3X( Heat shrink Rate: 2: 1 )

    Product Model As supplied(mm) Completely after recovery(mm)
    Inside diameter Width of the compressed Double wall thickness Reduced diameter Single-layer thickness
    DYF-3X-1.6 2.00±0.20 3.7±0.3 0.47±0.10 ≤0.53 0.52±0.06
    DYF-3X-2.4 2.79±0.20 5.0±0.3 0.47±0.10 ≤0.79 0.57±0.06
    DYF-3X-3.2 3.64±0.23 6.3±0.4 0.48±0.10 ≤1.06 0.61±0.06
    DYF-3X-4.8 5.26±0.25 8.9±0.4 0.49±0.10 ≤1.59 0.67±0.06
    DYF-3X-6.4 6.92±0.28 11.5±0.4 0.50±0.10 ≤2.36 0.71±0.06
    DYF-3X-9.5 10.2±0.32 16.7±0.5 0.52±0.11 ≤3.18 0.77±0.06
    DYF-3X-12.7 13.5±0.36 21.8±0.6 0.53±0.11 ≤4.75 0.80±0.07
    DYF-3X-19 20.1±0.40 32.2±0.6 0.55±0.11 ≤6.35 0.84±0.07
    DYF-3X-25 26.7±0.45 42.5±0.7 0.56±0.12 ≤8.47 0.86±0.07
    DYF-3X-38 39.8±0.51 63.2±0.8 0.57±0.12 ≤12.9 0.89±0.07
    DYF-3X-51 53.0±0.56 83.9±0.9 0.57±0.1 ≤17.2 0.90±0.08
    DYF-3X-76 79.4±0.56 125.3±1.0 0.57±0.13 ≤25.8 0.92±0.09
  • Product features:
    1, standard: ASTM d 2671
    2, solid color code standard: SAE AS 81531 and MIL-STD-202G/215K
    3, shrink ratio: 2:1 and 3:1, anti-ultraviolet radiation. soft. flame retardant
    4, fire and smoke index standards: NF F16-101
    5, shrinkage temperature: ≥ 85 ℃
    6, final shrinkage temperature: ≥ 115 ℃
    7, operating temperature:-55 ° c-+ 125 ℃
    8, environmental protection standard: h material. IPC/JEDEC-J-STD-709
    9, standard color: 10 kinds of color can be customized