• Product name: KY-PVC environment friendly heat shrinkable sleeving

Product introduction:  
Made of PVC material, good electrical insulation properties. Suitable for electronic components, packaging materials, such as aluminum electrolytic capacitors, batteries, inductors and other fields.

Product features:
Low temperature shrinkage, excellent electrical insulation, flame retardant
2 kinds of temperature: 90 ℃, 105 ℃ 

一、105 ° c PVC heat shrink tubing, model: KY-PVC 105 ℃, the specifications are as follows::

Size(mm) Lay flat(mm) Wall thickness
(mm)
Horizontal shrinkage ratio
(%)
Vertical Shrinkage ratio
(%)
High temperature vertical shrinkage ratio(%)
Hot Oven(180±2)℃×15(180±2)℃×15min(%)
Ф3 5.5±0.2 0.085±0.01 48±4 7±2 14±3
Ф4 7.3±0.2 0.09±0.01 `` 6±2 ``
Ф 5 9.2±0.2 `` `` `` ``
Ф 6 10.6±0.2 `` `` `` ``
Ф6.3 11.1±0.2 `` `` `` ``
Ф8 14.1±0.2 0.095±0.01 `` `` ``
Ф9 15.5±0.2 `` `` `` ``
Ф10 17.1±0.2 0.10±0.01 `` `` ``
Ф12 20.7±0.2 0.10±0.015 `` 7±2 17±3
Ф12.5 21.6±0.2 `` `` `` ``
Ф13 22.1±0.3 `` `` `` ``
Ф14.5 24.6±0.3 `` `` `` ``
Ф16 27.1±0.3 0.11±0.015 `` `` ``
Ф18 30.1±0.3 `` `` `` ``
Ф20 33.2±0.3 0.12±0.015 `` `` 19±3
Ф22 36.3±0.3 `` `` `` ``
Ф25 41.4±0.4 0.14±0.02 `` 9.5±2 ``
Ф30 50.0±0.6 `` `` `` ``
Ф35 57.4±0.7 `` `` `` ``
Ф40 66.2±1.0 `` `` `` ``
Ф50 83.5±1.5 0.30±0.03 38±5 15±5 ≤40.0
Ф63.5 106.0±1.5 `` `` `` ``
Ф76 125.0±1.5 `` `` `` ``
Ф89 145.0±1.5 `` `` `` ``
Ф100 156.0±1.5 `` `` `` ``
Color: black, white, red, blue, yellow, green, transparent
Specifies the size, cropping can be provided according to the special requirements of the customer
Special Note:
Please at 30 ℃ environment products, avoid exposure to direct sunlight or close to heat sources.

Product introduction:  
Made of PVC material, good electrical insulation properties. Suitable for electronic components, packaging materials, such as aluminum electrolytic capacitors, batteries, inductors and other fields.

Product features:
Low temperature shrinkage, excellent electrical insulation, flame retardant
2 kinds of temperature: 90 ℃, 105 ℃ 

Product Property Test method Unit Test Date
Structural ormula

 

appearance  Pollution-free, foreign bodies, etc
undissolved partical mm2 ≤0.7
(280mm)  bend mm 8Φ以下(under 8Φ)<3.0
10Φ以上(above 10Φ)<3.5
density ATSM D792 g/cm3 1.2~1.4
tensile strength ASTM D638 N/m2 >107
break elongation ASTM D638 % >42%
water absorption ASTM D570 % <2.0%
dielectric strength ASTM D149 KV/mm >15
surface resistivity ASTM D257 Ω >109
Volume resistivity ASTM D257 Ω·cm >1014
Copyright(2016-2020) DONGGUAN KE YU NEW MATERIALS TECHNOLOGY CO.,LTD Add:No.29, Jiefang Road, Xiasha Village, Shipai Town, Dongguan, Guangdong  粤ICP备05066754号  
 
 
  •  
  • top