KY-T transparent non-flame retardant heat shrinkable sleeving

Browse similar products

Previous Page : KY-HL Yellow & Green Striped Polyoleefin Heat Shrink Tubing

Next : KY environment friendly heat shrink pipe

  • Product name: KY-T transparent non-flame retardant heat shrinkable sleeving

Product introduction:
Transparent, non-flame retardant, very soft, lustrous, good light transmission and low temperature fast-twitch, when insulation protection applies, no excessive demands on temperature and can be seen within the encapsulated object.

Product features:
Low temperature shrinkage, wall panels, thin, transparent film
Good physical, chemical and electronic properties
Non-halogen
Flex-shrink ratio：2：1
  
Operation indicator
Shrink temperature：60℃
End temperature：100℃
Working temperature：-55℃~105℃

Part Number SIZE (MM) As supplied (mm) After recovered (mm) Standard Length(Meter) Application（mm)
Inside diameter(D) Wall thickness(T) Inside diameter( d ) Wall thickness( t )
KY-T-0006 ¢ 0.6 0.9±0.2 0.15±0.03  ≤0.40 0.28±0.06 200±2 0.4-0.7
KY-T-0007 ¢ 0.7 0.9±0.2 0.15±0.03  ≤0.45 0.28±0.06 200±2 0.5-0.7
KY-T-0008 ¢ 0.8 1.1±0.2 0.15±0.03  ≤0.50 0.30±0.06 200±2 0.6-0.8
KY-T-0010 ¢ 1.0 1.5±0.2 0.18±0.03  ≤0.65 0.36±0.08 200±2 0.75-0.9
KY-T-0015 ¢ 1.5 2.0±0.3 0.18±0.03  ≤0.85 0.36±0.08 200±2 0.95-1.4
KY-T-0020 ¢ 2.0 2.5±0.3 0.20±0.04  ≤1.00 0.40±0.08 200±2 1.1-1.8
KY-T-0025 ¢ 2.5 3.0±0.3 0.20±0.04  ≤1.25 0.40±0.08 200±2 1.35-2.3
KY-T-0030 ¢ 3.0 3.5±0.4 0.20±0.04  ≤1.5 0.40±0.08 200±2 1.6-2.7
KY-T-0035 ¢ 3.5 4.0±0.4 0.22±0.04  ≤1.75 0.44±0.08 200±2 1.85-3.2
KY-T-0040 ¢ 4.0 4.5±0.4 0.25±0.04  ≤2.05 0.50±0.08 200±2 2.1-3.6
KY-T-0045 ¢ 4.5 5.0±0.4 0.25±0.04  ≤2.25 0.50±0.08 100±1 2.35-4.0
KY-T-0050 ¢ 5.0 5.5±0.4 0.25±0.04  ≤2.5 0.50±0.08 100±1 2.6-4.5
KY-T-0055 ¢ 5.5 6.0±0.4 0.25±0.04  ≤2.75 0.50±0.08 100±1 2.8-5.5
KY-T-0060 ¢ 6.0 6.5±0.4 0.28±0.04  ≤3.0 0.55±0.08 100±1 3.1-5.4
KY-T-0065 ¢ 6.5 7.0±0.4 0.28±0.04  ≤3.25 0.55±0.08 100±1 3.2-6.0
KY-T-0070 ¢ 7.0 7.5±0.4 0.28±0.04  ≤3.5 0.55±0.08 100±1 3.7-6.3
KY-T-0080 ¢ 8.0 8.5±0.5 0.28±0.04  ≤4.0 0.60±0.10 100±1 4.2-7.2
KY-T-0090 ¢ 9.0 9.5±0.5 0.30±0.05  ≤4.5 0.60±0.10 100±1 4.7-8.0
KY-T-0100

¢ 10

 10.5±0.5 0.30±0.05  ≤5.0 0.60±0.10 100±1 5.2-9.0
KY-T-0110

¢ 11

 11.5±0.5

 0.30±0.05  ≤5.5 0.60±0.10 100±1 5.7-10
KY-T-0120

¢ 12

 12.5±0.5 0.30±0.05  ≤6.0 0.60±0.10 100±1 6.2-11
KY-T-0130

¢ 13

 13.5±0.5 0.35±0.06  ≤6.5 0.70±0.10 100±1 6.7-12
KY-T-0140

¢ 14

 14.5±0.5 0.35±0.06  ≤7.0 0.70±0.10 100±1 7.3-13
KY-T-0150

¢ 15

 15.5±0.5 0.40±0.08  ≤7.5 0.75±0.10 100±1 7.8-14
KY-T-0160

¢ 16

 16.5±0.5 0.40±0.08  ≤8.0 0.75±0.10 100±1 8.3-15
KY-T-0170

¢ 17

 17.5±0.5 0.40±0.08  ≤8.5 0.75±0.10 100±1 8.8-16
KY-T-0180

¢ 18

 19.0±0.7 0.40±0.08  ≤9.0 0.75±0.10 100±1 9.3-17
KY-T-0200

¢ 20

 21.0±0.7 0.40±0.08  ≤10.0 0.75±0.10 100±1 10.4-19
KY-T-0220

¢ 22

 23.0±0.7 0.40±0.08  ≤11.0 0.80±0.10 100±1 11.4-21
KY-T-0250

¢ 25

 26.0±0.7 0.50±0.10  ≤12.5 0.90±0.10 50±0.5 12.8-24
KY-T-0280

¢ 28

 29.0±0.7 0.50±0.10  ≤14.0 0.90±0.10 50±0.5 14.4-29
KY-T-0300 ¢ 30 31.0±0.7 0.50±0.10  ≤15.0 0.95±0.10 50±0.5 16-29
KY-T-0350 ¢ 35 36.0±0.7 0.50±0.10  ≤17.5 1.00±0.12 50±0.5 18-34
KY-T-0400 ¢ 40 41.0±0.7 0.55±0.10  ≤20.0 1.00±0.12 50±0.5 21-39
KY-T-0450 ¢ 45 46.0±0.7 0.55±0.10  ≤22.5 1.00±0.12 25±0.5 23-44
KY-T-0500 ¢ 50 51.0±0.7 0.55±0.10  ≤25.0 1.00±0.12 25±0.5 26-49

Color：
Transparency refers to the size, cropping can be provided according to the special requirements of the customer

Product diagram：

Average thickness = (high + low wall thickness wall thickness) ÷ 2

Product introduction:
Transparent, non-flame retardant, very soft, lustrous, good light transmission and low temperature fast-twitch, when insulation protection applies, no excessive demands on temperature and can be seen within the encapsulated object.

Product features:
Low temperature shrinkage, wall panels, thin, transparent film
Good physical, chemical and electronic properties
Non-halogen
Flex-shrink ratio：2：1
  
Operation indicator
Shrink temperature：60℃
End temperature：100℃
Working temperature：-55℃~105℃

Product Property Performance requirements Test method Test Date
Tensile strength 10.4MPa min. ASTM D 638 ≧10.4MPa
Elongation at break 400% min. ASTM D 638 ≧400%
Dielectric voltage withstand and breakdown 2500V,60sec,
No breakdown		 UL224 Pass
Volume resistance 1014Ω‧cm min. ASTM D 876 ≧1014Ω‧cm
 Voltage rating 300 V / 600V
Temperature rating 105℃
Copyright(2016-2020) DONGGUAN KE YU NEW MATERIALS TECHNOLOGY CO.,LTD Add：No.29, Jiefang Road, Xiasha Village, Shipai Town, Dongguan, Guangdong 　粤ICP备05066754号 　
 
 
  • Peter,Lee
  • Joany
  •  
  • top