• Product name: HJT-6X adhesive heat shrinkable sleeving with six times of thick wall

Product introduction:
Polyolefin outer PE material is very thick, inner layer of glue, shrinkage of up to 6 times, to have a special inner diameter of cable, connectors, electronic components, and special design. With high insulation properties and excellent mechanical protection properties. Very high shrink ratio so that it can be widely used in various special cases covered.

Product features:
Shrink ratio: 6:1
Wear-resistant, waterproof and anti-UV
Excellent physical properties,Standard color: black
       
Operation indicator:
Shrink temperature:80℃
End temperature:120℃
Working temperature:-55℃~110℃
Conformance to standard:Approvals
Compliance with ROHS environmental, 110 

Product Number/Size As Supplied (mm) After recovered(mm) Stand length
M/PCS
d.( max) w.t.( Total
Wall Thickness )
HJT-6X   19.0/3.2 19.0 3.2 3.2 1.22
HJT-6X   33.0/5.5 33.0 5.5 3.4 1.22
HJT-6X   44.4/7.4 44.4 7.4 3.6 1.22
 HJT-6X   50.8/8.3 50.8 8.3 4.3 1.22
  HJT-6X   69.8/11.7 69.8 11.7 4.8 1.22
  HJT-6X   88.9/17.1 88.9 17.1 4.8 1.22
    HJT-6X   119.4/22.9 119.4 22.9 4.8 1.22
HJT-6X   235/40 235 22.9 4.8 1.22

Standard colors: black, red, and other colors can be customized.
Specifies the size, cropping can be provided according to the special requirements of the customer 

Product introduction:
Polyolefin outer PE material is very thick, inner layer of glue, shrinkage of up to 6 times, to have a special inner diameter of cable, connectors, electronic components, and special design. With high insulation properties and excellent mechanical protection properties. Very high shrink ratio so that it can be widely used in various special cases covered.

Product features:
Shrink ratio: 6:1
Wear-resistant, waterproof and anti-UV
Excellent physical properties,Standard color: black
       
Operation indicator:
Shrink temperature:80℃
End temperature:120℃
Working temperature:-55℃~110℃
Conformance to standard:Approvals
Compliance with ROHS environmental, 110 

Product Property Test method Test Date
Longitudinal shrinkage UL 224 0 -10%
Tensile strength ASTM D 2671 ≧14MPa
Elongation at break ASTM D 2671 ≧350%
density ASTM D 792 1.06g/cm3
Rate of partial wall ASTM D 2671 < 40%
Elongation after aging 150℃/168小时 ≧250%
Dielectric strength IEC 243
AC 2500V,60 sec.
> 20KV/mm
Volume resistance IEC 93 ≧1014Ω․cm(min.
Stability of copper ASTM D 2671 pass
Softening point ISO 62 < 0.15%
 Hot melt adhesive performance
Hot melt adhesive melting index ASTM D E8 95 ± 5℃
Peel strength DIN 30672 4N/cm
Prevent mold and rot ISO 846 pass
Stability of copper ASTM D 2671 Don't decay
Softening point ISO 62 < 0.2%
Copyright(2016-2020) DONGGUAN KE YU NEW MATERIALS TECHNOLOGY CO.,LTD Add:No.29, Jiefang Road, Xiasha Village, Shipai Town, Dongguan, Guangdong  粤ICP备05066754号  
 
 
  •  
  • top