+
  • Sewage treatment TPU aeration membrane tube(1).jpg
  • Aeration system TPU Tube(1).jpg
  • Aeration system TPU membrane(1).jpg
  • Sewage Treatment System(1).jpg

Large size PU Tube resistant to hydrolysis


Product Overview:

The high-transparency TPU Tube for water treatment system is made of imported raw materials and can be used in sewage treatment tanks in various fields as a tubular aeration system. KEYUACE can accept the aeration punching process of TPU Hose. High transparent TPU hose has the advantages of high pressure resistance, low resistance, high oxygen transfer rate, anti-aging, acid and alkali resistance, wear resistance, bending resistance, and can withstand high and low temperature changes from 80 degrees to minus 40 degrees. Large size PU Tube resistant to hydrolysis can be used in High-density farms, biological contact oxidation ponds, petrochemicals, oil refining, coking, printing and dyeing, pharmaceuticals, brewing, industrial wastewater and urban sewage etc.
Contact us
  • Product Features
  • Specifications
  • Technical data
  • Video
  • Large size PU Tube resistant to hydrolysis Supply of fine air bubbles; Oxygen for activated sludge nitrification; Continuous/intermittent gas supply system; Oxygen delivery before biological reaction and fixed bed; Mixing and stirring of activated sludge tanks (municipal and industrial wastewater); Grit tank ventilation; Aerobic aeration tank Aeration; water re-restoration systems; aquaculture, etc.

    Key words:
    • Large size PU Tube
    • resistant to hydrolysis PU Tube
    • Wastewater Treatment
  • Commonly used specifications:
    Width 185MM, width 145MM, width 100MM, etc., can be customized according to customer requirements.

  • Technical Parameter:
    1. Compared with EPDM and silica gel on the existing market, it is more energy-saving due to high efficiency and low pressure loss;
    2. There is no softener in the TPU diaphragm, and the service life is long and unbroken;
    3. Wider ventilation range: normal ventilation: 3Nm-2/h • m - 8Nm-2/h • m , minimum ventilation up to: 1 Nm-2/h • m, maximum ventilation up to 1 Nm-2/h • m ,, up to 18 Nm-2/h • m when flushing with atmospheric volume;
    4. More oxygen can be obtained relative to the same aeration density;
    5. Fine and consistent bubble size;
    6. Excellent tear and abrasion resistance (2.5 - 4 times mechanical strength, higher than most EPDM and silicone;
    7. Excellent chemical properties;
    8. Excellent resistance practicality in municipal and industrial;
    9. Resistance to microbial hydrolysis, oil resistance, water resistance, mold resistance;
    10. Good recyclability;