+
  • 热缩圈垫(1).jpg
  • 航空电缆线束应力消除箍圈套或圈箍(1).jpg
  • Cable Clamp Heat-Shrink Grommet.jpg
  • 热缩垫圈(1).jpg
  • 热缩线尾夹(1).jpg

KY-HSG Cable Clip Heat Shrink Gasket ( Shrink Hoop )


Product Overview:

KY-HSG Cable Clip Heat Shrink Gasket ( Shrink Hoop ) is a heatable gasket with a very high thermal shrinkage rate and good strain relief. This product can be placed on the cable harness after the connector crimping operation is completed. This material with a very high heat shrink ratio conveniently fills the gap between the clip-on connector attachment and the cable.
Contact us
  • Product Features
  • Specifications
  • Technical data
  • Video
  • When snapped into place, KY-HSG Cable Clamp Heat-Shrink Grommet provide better and more convenient strain relief than traditional seals (such as tape, gaskets, or a combination of the two), while matching most cable harness shapes, ranging from From single-conductor harnesses to high-density multi-conductor harnesses.

     

    Repairs and sealing are easier with KY-HSG Cable Clip Heat Shrink Gasket ( Shrink Hoop ), heat the gasket until soft, and pass a non-metallic probe through the center of the wire bundle (enlarge the inner diameter of the gasket). The gasket remains expanded after cooling, allowing wires to be added and removed or reworked. The system can then be inspected, reheated (re-used shrink), positioned and snapped into the ring gasket.

     

     

    Temperature range:

    -55  ~ 135
     

    Features:

    1. Excellent stress relief, short installation time (only 10~20 seconds for curved installation), not easy to make mistakes, easy to reseal .
    2. No tape or lead buildup in the ring gasket .
    3. The inner diameter of the product can be expanded repeatedly, allowing additional wires to be added to the cable bundle .
  • Model

    Min ID

    (before shrink)

    (X1 )mm

    Max ID

    (after shrink)

    Xmm

    ODY)

    Reference(mm)

    LengthL)

    Referencemm

    weightgm)

    Reference

    KY-HSG -1

    1’’ 

    25

    0.08’’

    2.1

    0.25’’

    6.0

    0.5’’

    13

    0.75

    KY-HSG -2

    1.23’’

    31

    0.1’’

    2.6

    0.375’’

    10

    0.5’’

    13

    1

    KY-HSG -3

    1.44’’

    37

    0.14’’

    3.6

    0.5’’

    13

    0.5’’

    13

    1.5

    KY-HSG -4

    1.85’’

    47

    0.18’’

    4.7

    0.562’’

    14

    0.75’’

    19

    3.5

    KY-HSG -5

    2’’

    51

    0.20’’

    5.1

    0.812’’

    21

    0.75’’

    19

    5

    Note:The allowed  length after heats hrink1.91 [0.075] per side of the chuck, which is the minimum value in most cases.