+
  • Sewage treatment TPU aeration membrane tube.jpg

Sewage treatment TPU aeration membrane tube


Product Overview:

Supply of fine air bubbles; Oxygen for activated sludge nitrification; Continuous/intermittent gas supply system; Oxygen delivery before biological reaction and fixed bed; Mixing and stirring of activated sludge tanks (municipal and industrial wastewater); Grit tank ventilation; Aerobic aeration tank Aeration; water re-restoration systems; aquaculture, etc.
Contact us
  • Product Features
  • Specifications
  • Technical data
  • Video
  • 1. Compared with EPDM and silica gel on the existing market, it is more energy-saving due to high efficiency and low pressure loss;

    2. There is no softener in the TPU diaphragm, and the service life is long and unbroken;

    3. Wider ventilation range: normal ventilation: 3Nm-2/h m - 8Nm-2/h m , minimum ventilation up to: 1 Nm-2/h m, maximum ventilation up to 1 Nm-2/h m ,, up to 18 Nm-2/h m when flushing with atmospheric volume;

    4. More oxygen can be obtained relative to the same aeration density;

    5. Fine and consistent bubble size;

    6. Excellent tear and abrasion resistance (2.5 - 4 times mechanical strength, higher than most EPDM and silicone;

    7. Excellent chemical properties;

    8. Excellent resistance practicality in municipal and industrial;

    9. Resistance to microbial hydrolysis, oil resistance, water resistance, mold resistance;

    10. Good recyclability;

     

    Commonly used specifications:

    Width 185MM, width 145MM, width 100MM, etc., can be customized according to customer requirements.

     

     

    1. Compared with EPDM and silica gel on the existing market, it is more energy-saving due to high efficiency and low pressure loss;

    2. There is no softener in the TPU diaphragm, and the service life is long and unbroken;

    3. Wider ventilation range: normal ventilation: 3Nm-2/h • m - 8Nm-2/h • m , minimum ventilation up to: 1 Nm-2/h • m, maximum ventilation up to 1 Nm-2/h • m ,, up to 18 Nm-2/h • m when flushing with atmospheric volume;

    4. More oxygen can be obtained relative to the same aeration density;

    5. Fine and consistent bubble size;

    6. Excellent tear and abrasion resistance (2.5 - 4 times mechanical strength, higher than most EPDM and silicone;

    7. Excellent chemical properties;

    8. Excellent resistance practicality in municipal and industrial;

    9. Resistance to microbial hydrolysis, oil resistance, water resistance, mold resistance;

    10. Good recyclability;

    Commonly used specifications:

    Width 185MM, width 145MM, width 100MM, etc., can be customized according to customer requirements.