Classification and selection of temperature resistance levels for heat shrink tubing in different usage environments

Release time:

2025-03-18 21:02

Heat shrink tubing is classified into six temperature resistance levels based on working temperature: 125 ℃, 135 ℃, 150 ℃, 175 ℃, 200 ℃, 260 ℃, etc. The usage environment of heat shrink tubing with different temperature resistance levels is definitely different. The temperature resistance level is defined based on the maximum continuous working temperature. The following are the specific working temperature and usage temperature of heat shrink tubing with different temperature resistance levels, as well as the performance, usage, and usage environment of heat shrink tubing with different temperature resistance levels. The editor summarizes the commonly used heat shrink tubing now, hoping it will be helpful for everyone when choosing.

 

 

 

 

 

一、3 types of 125 ℃ heat shrink tubing

 

1.125 ℃ PE flame retardant heat shrink tubing

Continuous operating temperature and usage temperature

(1) Continuous use temperature:- 45℃~125℃;

(2) Minimum initial shrinkage temperature: 70 ℃, minimum complete shrinkage temperature: 100 ℃.

Application of flame retardant heat shrink tubing: Flame retardant heat shrink tubing is prepared from cross-linked polyolefin materials, with excellent physical, chemical, and electrical properties. Its main uses include electrical insulation of connectors, rust and corrosion prevention of solder joints, mechanical protection, and wire harness binding. It is commonly used in industries such as electronics, communication, automotive, shipbuilding, and aircraft manufacturing.

 

 

 

 

 

2.125 ℃ yellow green dual color heat shrink tubing

Continuous operating temperature and usage temperature

(1) Continuous use temperature:- 55℃~125℃;

(2) Minimum initial shrinkage temperature: 70 ℃, minimum complete shrinkage temperature: 110 ℃.

 

Product features:

(1) Shrinkage ratio 2:1; 3:1;

(2) The only dedicated heat shrink tubing for ground wire identification.

Application of yellow green dual color heat shrink tubing: A yellow green dual color heat shrink tubing made of soft, flame retardant, and irradiated cross-linked polyolefin composite. It is a type of PE series product and is a co extruded yellow green dual color flame retardant polyolefin heat shrink tubing specifically designed for ground wires.

 

 

 

         

 

        

3.125 ℃ double wall heat shrink tubing with adhesive

Continuous operating temperature and usage temperature

(1) Continuous use temperature:- 55℃~125℃

(2) Minimum initial shrinkage temperature: 80 ℃, minimum complete shrinkage temperature: 110 ℃

 

Product features:

(1) High shrinkage ratios of 3:1 and 4:1 can achieve sealing and insulation protection between connectors and cables;

(2) Due to the presence of hot melt adhesive with good adhesion, it can achieve sealing, moisture resistance, waterproofing, and corrosion resistance at cable connections and electronic components;

(3) Good physical, chemical, and electrical properties;

(4) Hot melt adhesive layer has good adhesion performance to plastics, rubber, metals, etc;

(5) Compliant with the European RoHS environmental directive.

 

 

 

 

 

 

二、135 ℃ heat shrink tubing

 

135 ℃ heat shrink tubing is divided into military grade flame-retardant heat shrink tubing and military grade double wall heat shrink tubing with adhesive. It is commonly used in military standard heat shrink tubing and has the same functional purpose as the 125 ℃ series products, except that the working temperature is increased from 125 ℃ to 135 ℃.

Continuous operating temperature and usage temperature

Production execution standard for military elevation flame retardant heat shrink tubing: AMS-DTL-23053/5。

Compared with 125 ℃ heat shrink tubing, there are three types of shrinkage ratios: 2:1, 3:1, and 4:1.

(1)Continuous use temperature:- 55℃~135℃ ;

(2)Minimum initial shrinkage temperature: 84 ℃, minimum complete shrinkage temperature: 120 ℃.

Production execution standard for military standard adhesive double wall heat shrink tubing: AMS-DTL-23053/4。

(1)Continuous use temperature:- 55℃~135℃ ;

(2)Minimum initial shrinkage temperature: 70 ℃, minimum complete shrinkage temperature: 125 ℃.

 

 

 

 

三、150 ℃ heat shrink tubing

 

According to the material, it can be divided into three types: polyolefin heat shrink tubing, polyvinylidene fluoride heat shrink tubing, and oil resistant elastomer heat shrink tubing.

 

1.150 ℃ polyolefin heat shrink tubing

Continuous operating temperature and usage temperature

(1) Continuous use temperature:- 55℃~150℃;

(2) Minimum initial shrinkage temperature: 84 ℃, minimum complete shrinkage temperature: ≥ 120 ℃.

Product features:

(1) It is a new type of heat shrink tubing that is newly developed and cost-effective, while also achieving high temperature resistance and flame retardancy;

(2) Compared to polyvinylidene fluoride heat shrink tubing, it has better flexibility and stronger plasticity.

 

 

2.150 ℃ flexible polyvinylidene fluoride heat shrink tubing

Continuous operating temperature and usage temperature

(1) Continuous use temperature:- 55℃~150℃;

(2) Minimum initial shrinkage temperature: 125 ℃, minimum complete shrinkage temperature: 150 ℃.

Application of flexible polyvinylidene fluoride heat shrink tubing: This heat shrink tubing is made of irradiated cross-linked special fluorine-containing polymers and is used in applications that require high temperature resistance and friction resistance. It has excellent chemical corrosion resistance and solvent resistance properties. Protect cable components from mechanical damage or chemical corrosion, used for marking protection of cables or components, insulation and stress relief at connection welds.

 

 

 

 

 

3.150 ℃ oil resistant elastomer heat shrink tubing

Continuous operating temperature and usage temperature

(1) Continuous use temperature:- 75℃~150℃;

(2) Minimum initial shrinkage temperature: 90 ℃, minimum complete shrinkage temperature: 150 ℃.

150 ℃ oil resistant elastomer heat shrink tubing usage: Oil resistant heat shrink tubing is made by modifying polymer elastomers and can be used at high temperatures for a long time. It is resistant to diesel, aviation fuel, and high-temperature fluids. Generally used for the protection of separation joints in military vehicles, high-speed trains, ship equipment, or commercial cable terminals.

 

 

 

四、 175 ℃ semi-rigid polyethylene heat shrink tubing

 

175 ℃ semi-rigid polyvinylidene fluoride heat shrink tubing

Continuous operating temperature and usage temperature

(1) Continuous use temperature:- 55℃~175℃

(2) Minimum initial shrinkage temperature: 155 ℃, minimum complete shrinkage temperature: 175 ℃

Characteristic:

(1) Flexible, semi hard, thin-walled insulation, high flame retardancy;

(2) Good high temperature resistance and luster;

(3) Excellent solvent resistance, oil resistance, and chemical corrosion resistance.

Application of 175 ℃ semi-rigid polyvinylidene chloride heat shrink tubing: It has outstanding wear resistance, chemical corrosion resistance, and high temperature performance, especially suitable for occasions that require high temperature resistance. It is used for insulation protection and pressure relief at welding joints, as well as identification of coating components.

 

 

 

 

 

五、200 ℃ fluororubber heat shrink tubing

 

200 ℃ black fluororubber heat shrink tubing

Continuous operating temperature and usage temperature

(1) Continuous use temperature:- 65℃~200℃

(2) Minimum initial shrinkage temperature: 150 ℃, minimum complete shrinkage temperature: 175 ℃

Application of 200 ℃ Fluororubber Heat Shrinkable Sleeve: The 200 ℃ Fluororubber Heat Shrinkable Sleeve has excellent resistance to high and low temperatures, oil and chemical reagents, especially suitable for places that require heat resistance (such as aircraft or car engines or electrical and hydraulic systems near fuel tanks) and environments that require chemical solution resistance. It is suitable for insulation protection and stress relief of cable harnesses in these environments, protecting electronic and electrical equipment from damage.

 

 

 

 

 

六、260 ℃ PTFE heat shrink tubing

 

1.260 ℃ PTFE transparent heat shrink tubing

Continuous operating temperature and usage temperature

(1) Continuous use temperature:- 67℃~260℃

(2) Minimum complete shrinkage temperature: 350 ℃

Characteristic:

(1) The shrinkage ratio of this heat shrink tubing is only 1.7:1, which is significantly different from other products;

(2) Transparent color is a regular color with obvious whitening phenomenon, which is easy to distinguish.

260 ℃ PTFE heat shrink tubing usage: This heat shrink tubing is made of polytetrafluoroethylene material, commonly known as the "plastic king", and has special properties such as high temperature resistance of 260 ℃, corrosion resistance, high insulation, and high mechanical strength. It is widely used in important technological industries such as electronics, computers, electric heating, aerospace, military, and communication. Its chemical and oil resistance properties protect hydraulic pipelines and their joints from corrosion.

 

 

 

 

 

 

Dongguan Keyu New Material Technology Co., Ltd. welcomes customers to inquire:

mobile phone: +(86)13580987327, +(86)18676352059

Phone: +(86)-0769-81372186

Fax: +(86)-0769-81372885

E-mail: Joany150138@keyuace.com

Net1: http//keyuace.1688.com

Net2: www.keyuace.com