Application and assembly specifications of heat shrink tubing in automobiles
Release time:
2025-03-18 21:21
Heat shrink tubing is widely used in automobiles and can be divided into wire harness systems, piping systems, and other systems based on their characteristics. What are the specific applications? Let's take a look together.
01 Wiring harness system
Let's first talk about the wiring harness system, which is usually divided into spliced wiring harnesses, wiring harness terminals, cable joints, battery wires, connector wiring harnesses, etc. It connects important functions such as air conditioning, ABS brakes, signal lights, etc. It has very high requirements for insulation and sealing. Generally, double wall heat shrink tubing is used to wrap the wires and cables to prevent moisture, dust, oil stains, etc. from entering, ensuring the normal operation of the wires and cables.

At the same time, the double wall heat shrink tubing corresponds to different wire harnesses based on differences in temperature resistance level and adhesive performance. For example:
Splicing wire harness: During the processing of double wall heat shrink tubing, the inner layer of hot melt adhesive should fully flow into the gaps between multiple wires, and after cooling and shaping, achieve sealing. Therefore, it is necessary to choose double wall heat shrink tubing with excellent fluidity and high shrinkage ratio of hot melt adhesive. This not only ensures effective wrapping, but also provides greater clamping force, which is beneficial for filling the gaps in the wire harness with hot melt adhesive.

In addition, with the rise of new energy vehicles, Y-shaped finger sleeves used at the branching of high-voltage cables in new energy vehicles can achieve insulation and sealing protection, while being easy to install and providing long-lasting and reliable insulation and sealing.

Wire harness terminals: Usually, the wire harness combination on one side of the wire is relatively simple, and the heat shrink tubing is easy to seal, while the metal joint has a large gap and is not easy to seal. It is recommended to use heat shrink tubing with sufficient adhesive content and good flow of hot melt adhesive, which is beneficial for the hot melt adhesive to fully flow and fill the gap at the front end during the heating process.

Cable joint: Cable joints are suitable for selecting double wall heat shrink tubing with low fluidity to prevent sliding during heating.
Battery cable: Battery cables are suitable for sealing with double wall heat shrink tubing that has low fluidity and good adhesion to metal.
02 Pipeline system
On the piping system, the areas where heat shrink tubing is used usually include brake piping, air conditioning piping, high-pressure water pipes, and cooling water pipes. In most cases, single wall heat shrink tubing is chosen for wrapping to provide mechanical protection, isolation, and friction resistance. In some cases, double wall heat shrink tubing may be used. The following example is a PVC heat shrink tubing specifically designed for condensing machines.

Air conditioning pipe: When the heat shrink pipe shrinks, it should be well attached to the air conditioning pipe, and should not wrinkle when bent into shape. At the same time, it plays a role in shock absorption and noise reduction protection between various parts.
Automotive brake pipes and fuel pipes: It is necessary to use heat shrink pipes with characteristics such as earthquake resistance, wear resistance, oil resistance, corrosion resistance, and low temperature resistance to protect automotive brakes and fuel pipes from mechanical damage and moisture that may cause corrosion.

Cooling water pipe: Ordinary heat shrink pipes are prone to bulging and wrinkling caused by holding air, and special designed heat shrink pipes need to be used to wrap and bond them together to achieve environmental and mechanical protection for automotive rubber cooling water pipes.

03 Other applications
At other application levels, there are mainly engine systems and identification systems.
High temperature resistant heat shrink tubing is commonly used in engine systems, such as diesel resistant elastomer heat shrink tubing, PVDF heat shrink tubing, PTFE heat shrink tubing, etc., which act on the engine compartment and have a temperature resistance level of over 150 ℃, as well as excellent performance such as high wear resistance, cutting resistance, and corrosion resistance.
In addition, the high-voltage copper bar polyolefin heat shrink tubing applied to electric vehicle batteries has the characteristics of high shrinkage rate, wear resistance, and non suffocating. It can be connected and bonded to various busbars, effectively protecting busbars in limited spaces.

The identification system usually uses heat shrink tubing with printed words, which has the characteristics of halogen-free, low smoke, soft and smooth surface, and excellent adhesion of printing ink. It can be used for cable identification, easy installation, and after-sales differentiation and identification.

Heat shrink tubing also plays a crucial role in the installation and maintenance of automotive electronic devices.
For example, in car audio systems, heat shrink tubing can be used for insulation and protection of connectors to prevent noise and interference. In automotive lighting systems, heat shrink tubing can be used for sealing and waterproofing light bulbs, improving the reliability and lifespan of lighting fixtures.
In addition, heat shrink tubing can also be used for the protection of automotive sensors, maintenance of automotive instrument panels, and other aspects, providing good guarantees for the normal operation of automobiles.

04 Wiring harness assembly specifications
一、 Splicing wire harness
Before heat shrinking, check the status of the wiring to ensure that there are no individual wires with poor wiring or copper wires protruding. After heat shrinking, there should be hot melt glue overflowing from both ends of the heat shrink tube, and the following points should be met:
1. Copper wire shall not puncture the heat shrink tubing;
2. The single end of the heat shrink tubing wrapped with wire skin should be ≥ 1.5cm, and the multi end should be ≥ 2cm.
3. The heat shrink tubing should shrink evenly and adhere to the outer layer of the wire. After heat shrink, there should be no visible gaps between the adhesive surface, heat shrink tubing, and wire; Heat shrink tubing and tubing must not be burnt or insufficiently heat shrunk.
4. If single-sided wiring is used, at least 1cm should be reserved at the wireless end of the heat shrink tubing after wiring;
二、 Wire harness terminal
After heat shrinking, the heat shrink tubing should wrap all copper wires, and the visible copper wire at the end of the terminal should be fully covered by the heat shrink tubing or hot melt adhesive. At the same time, the following standards should be met:
1. Copper wire shall not puncture the heat shrink tubing;
2. The skin area of the heat shrink tubing wrapping line should be at least 1cm;
3. Glue dispensing should not affect assembly or the normal use of assembly fastening tools;
4. The heat shrink tubing should shrink evenly and adhere to the wires and terminals. After heat shrink, there should be no visible gaps between the adhesive surface, heat shrink tubing, terminals, and wires; Heat shrink tubing and tubing must not be burnt or insufficiently heat shrunk.
三、 Analysis of influencing factors on the application of heat shrink tubing
1. Product consistency: It is necessary to choose heat shrink tubing that meets customer performance requirements, such as single and double walls, shrinkage ratio, temperature resistance, material, pipe diameter, length, etc.
2. Parameter uniformity: time, temperature, interval of heat shrink quantity, temperature tolerance, etc. during the heat shrink process.
3. Equipment consistency: It is necessary to ensure that the equipment models in each batch are consistent and that the stability of the working state is consistent.
4. Consistency of tooling: The consistency of the position of the heat shrink tubing relative to the mating end of the tooling and the position of the wire harness in the heat shrink equipment.
5. Terminal structure: Specific terminal structures require targeted selection and feasibility evaluation.
6. Environmental factors: Due to the different seasons or inventory environments of wire harness suppliers, they should adjust the heat shrink parameters appropriately and conduct performance verification according to the corresponding changes.
Dongguan Keyu New Material Technology Co., Ltd. welcomes customers to inquire:
mobile phone: +(86)13580987327, +(86)18676352059
Phone: +(86)-0769-81372186
Fax: +(86)-0769-81372885
E-mail: Joany150138@keyuace.com
Net1: http//keyuace.1688.com
Net2: www.keyuace.com
Previous page