(一) High temperature resistant and flame-retardant insulation polyimide PI sleeve
Release time:
2025-04-10 10:31
Introduction: Polyimide (PI) refers to a type of polymer with an acyl imine ring (- CO-NR-CO -) on the main chain, and is one of the organic polymer materials with the best comprehensive performance. It has a high temperature resistance of over 400 ° C and a long-term use temperature range of -200~300 ° C. Some parts have no obvious melting point, high insulation performance, a dielectric constant of 4.0 at 103 Hz, and a dielectric loss of only 0.004~0.007, belonging to F to H level insulation. Polyimide (PI) is currently one of the best heat-resistant polymer materials due to its rigid aromatic heterocyclic structure, and its Tg can reach 350 ℃ or higher. At the same time, the film also exhibits excellent thermal stability, good mechanical properties, solvent resistance, and low dielectric constant, thus demonstrating irreplaceable advantages. Polyimide films are also widely used in fields such as information, energy, healthcare, and national defense.

The large-scale application of flexible OLED display technology in smartphones has driven the development of various polyimide films required for it, and has also prompted researchers to continue to work hard to develop PI films with more outstanding individual performance, stronger comprehensive performance, and lower cost. According to the chemical structure of repeating units, polyimides can be divided into three types: aliphatic, semi aromatic, and aromatic polyimides. According to the intermolecular forces, it can be divided into cross-linked and non cross-linked types. Polyimide, as a special engineering material, has been widely used in aviation, aerospace, microelectronics, nanotechnology, liquid crystals, separation membranes, lasers and other fields. In the 1960s, countries around the world included the research, development, and utilization of polyimide as one of the most promising engineering plastics of the 21st century. Polyimide, due to its outstanding characteristics in performance and synthesis, has been fully recognized for its enormous application prospects, whether as a structural material or a functional material. It is known as a "problem solver" and it is believed that "without polyimide, there would be no microelectronics technology today".

Introduction to Polyimide POLIIDE
一、 Classification of Polyimide PI
Polymer materials are widely used in fields such as electronics, communications, military equipment manufacturing, aerospace, etc. due to their excellent electrical insulation, chemical corrosion resistance, lightweight, and low density. Polyimide (PI) is an aromatic heterocyclic polymer compound constructed from chain links containing imide groups [- C (O) - N (R) - C (O) -]. It has excellent electrical insulation, radiation resistance, mechanical properties, and is known as a "problem-solving expert". PI, as a structural or functional material, has great development prospects, especially for PI film materials, which are known as the "golden film". It is one of the earliest polyimide products developed and applied, widely used in printed circuit boards, electronic packaging, interlayer media, display panels and other fields.

Polycondensation type: Polycondensation type aromatic polyimides are prepared by reacting aromatic diamines with aromatic dianhydride, aromatic tetracarboxylic acid, or aromatic tetracarboxylic acid diesters. Due to the fact that the synthesis of condensed polyimides is carried out in high boiling non proton polar solvents such as dimethylformamide and N-methylpyrrolidone, and polyimide composite materials are usually formed using a prepreg molding process, these high boiling non proton polar solvents are difficult to evaporate completely during the prepreg preparation process. At the same time, volatile substances are also released during the polyamide acid cyclization (imidization) process, which easily creates pores in the composite material products and makes it difficult to obtain high-quality, pore free composite materials. Therefore, condensed polyimides are less commonly used as matrix resins for composite materials and are mainly used to manufacture polyimide films and coatings.
Additive type: Due to the aforementioned drawbacks of condensed polyimides, additive type polyimides have been developed successively to overcome these drawbacks. The main materials that have been widely used are poly (bismaleimide) and norbornene terminated polyimides. Usually, these resins are low relative molecular weight polyimides with unsaturated end groups, which are then polymerized through unsaturated end groups during application.
(1) Polybismaleimide
Polybismaleimide is formed by the condensation of maleic anhydride and aromatic diamines. Compared with polyimide, its performance is not inferior, but the synthesis process is simple, the post-processing is easy, the cost is low, and it can be easily made into various composite material products. But the solidified material is relatively brittle.
(2) Norbornene based capped polyimide resin
The most important of these is a type of PMR (in situ polymerization of monomer reactants) polyimide resin developed by NASA Lewis Research Center. PMR type polyimide resin is a solution that can be directly used to impregnate fibers by dissolving monomers such as alkyl esters of aromatic tetracarboxylic acids, aromatic diamines, and monoalkyl esters of 5-norbornene-2,3-dicarboxylic acids in an alkyl alcohol (such as methanol or ethanol). Polyimide can be divided into four categories: homopolymer PI, soluble PI, polyamide imide (PAI), and polyetherimide (PEI).

二、 Characteristics of Polyimide PI
1. According to thermogravimetric analysis, the initial decomposition temperature of fully aromatic polyimide is generally around 500 ℃. Polyimide synthesized from phthalic anhydride and p-phenylenediamine has a thermal decomposition temperature of 600 ℃, making it one of the most thermally stable polymers to date.
2. Polyimide can withstand extremely low temperatures and will not crack in liquid helium at -269 ℃.
3. Polyimide has excellent mechanical properties, and the tensile strength of unfilled plastics is above 100MPa. The film (Kapton) of homopolymer polyimide is above 170MPa, and the impact strength of thermoplastic polyimide (TPI) is as high as 261kJ/m2. And the biphenyl polyimide (Upilex S) reaches 400MPa. As an engineering plastic, the elastic modulus is usually 3-4GPa, and the fiber can reach 200GPa. According to theoretical calculations, the fiber synthesized from phthalic anhydride and p-phenylenediamine can reach 500GPa, second only to carbon fiber.
4. Some polyimide varieties are insoluble in organic solvents, stable to dilute acids, and generally not resistant to hydrolysis. This seemingly disadvantageous property sets polyimide apart from other high-performance polymers in that it can use alkaline hydrolysis to recover raw materials such as dianhydride and diamine. For example, for Kapton film, the recovery rate can reach 80% -90%. Changing the structure can also yield varieties that are highly resistant to hydrolysis, such as those that can withstand boiling at 120 ℃ for 500 hours.
5. Polyimide has a wide solubility spectrum. Depending on its structure, some varieties are almost insoluble in all organic solvents, while others can dissolve in common solvents such as tetrahydrofuran, acetone, chloroform, and even toluene and methanol.
6. The thermal expansion coefficient of polyimide is 2 × 10-5-3 × 10-5/℃, thermoplastic polyimide is 3 × 10-5/℃, biphenyl type can reach 10-6/℃, and some varieties can reach 10-7/℃.
7. Polyimide has high radiation resistance, and its film maintains a strength retention rate of 90% after 5 × 109rad fast electron irradiation.
8. Polyimide has good dielectric properties with a dielectric constant of around 3.4. By introducing fluorine or dispersing air nanoparticles in polyimide, the dielectric constant can be reduced to around 2.5. The dielectric loss is 10-3, the dielectric strength is 100-300kV/mm, and the volume resistance is 1017 Ω· cm. These performances can still be maintained at a high level over a wide temperature and frequency range.
9. Polyimide is a self extinguishing polymer with a low smoke emission rate.
10. Polyimide releases very little gas under extremely high vacuum.
11. Polyimide is non-toxic and can be used to manufacture tableware and medical appliances, and can withstand thousands of disinfections. Some polyimides also have good biocompatibility, such as non hemolytic in blood compatibility tests and non-toxic in vitro cytotoxicity tests.
三、 The synthesis pathway of polyimide PI
Polyimide has a wide variety of varieties and forms, and has multiple synthetic pathways, so it can be selected according to various application purposes. This synthetic versatility is also difficult for other polymers to possess. The synthesis introduction is as follows:
Polyimide is mainly synthesized from dianhydride and diamine. Compared with many other heterocyclic polymers such as polybenzimidazole, polybenzimidazole, polybenzthiazole, polyquinoline, etc., these two monomers have a wide range of raw material sources and are relatively easy to synthesize. There are many varieties of dianhydride and diamine, and different combinations can obtain polyimides with different properties.
Polyimide can be obtained by low-temperature condensation of dianhydride and diamine in polar solvents such as DMF, DMAC, NMP, or THEM/methanol mixed solvents to obtain soluble polyamic acid. After film formation or spinning, it is heated to around 300 ℃ to dehydrate and form a ring, which transforms into polyimide; Acetic anhydride and tertiary amine catalysts can also be added to polyamic acid for chemical dehydration and cyclization to obtain polyimide solution and powder. Diamine and dianhydride can also be heated and condensed in high boiling point solvents such as phenolic solvents to obtain polyimide in one step. In addition, polyimides can be obtained by reacting binary esters of quaternary acids with binary amines; It can also be converted from polyamic acid to polyisoimide first, and then to polyimide. These methods all bring convenience to processing. The former is called PMR method, which can obtain low viscosity and high solid solution. There is a window with low melt viscosity during processing, which is particularly suitable for the manufacturing of composite materials; The latter increases solubility and does not release low molecular weight compounds during the conversion process.
